Hardwood Floor Refinishing in Columbus, OH

Refinishing removes the old finish and a thin layer of wood through sanding, then rebuilds the finish system. Screen-and-recoat (buff and coat) abrades the existing finish and adds new coats without sanding to bare wood. If you have grey wear, deep scratches, or want a stain change, refinishing usually fits better.

Sometimes, yes. It depends on the wear layer thickness and the floor’s previous sanding history. We confirm feasibility during the in-home estimate before we quote.

Many standard projects can fit into a 1-day schedule, especially when the scope is straightforward. Larger homes, extensive repairs, stairs, or certain finish systems may extend the timeline. You’ll get clear timing for walk-on, furniture, and full cure.

Good crews run dust-controlled sanding and containment to keep dust low. We pair sanding equipment with HEPA vacuum support and mask-off work areas. You should still expect some fine dust, but it shouldn’t take over the house.

Water-based polyurethane stays clearer and typically has a faster dry profile. Oil-based systems warm the tone and can deepen colour, but they usually take longer to dry. We’ll recommend based on your stain goals, traffic, and indoor comfort priorities.

Some pet stains can be improved dramatically, but deep urine damage can penetrate beyond the surface. We’ll evaluate whether sanding, board replacement, or spot repairs make the most sense. The goal is a result that looks consistent from standing height, in real lighting.

Even stain comes from even sanding. We use a proper grit sequence and prep steps to reduce blotchiness, edge contrast, and visible sanding marks. We also recommend a test area if you’re changing color.

Timing depends on the finish system, temperature, and humidity. We’ll tell you exactly when light foot traffic is okay and when furniture and rugs can return. Full cure takes longer than “dry to the touch,” and that’s when the finish reaches its real durability.

Yes. Stair refinishing often needs extra detail work around edges, corners, and risers. We’ll quote stairs separately when needed so the scope stays clear.

Square footage, stain change, repairs, board replacement, stairs, and floor condition drive the price most. Prefinished vs site-finished surfaces can also change prep time. The in-home estimate is how you get an accurate number without surprises.